One Pro Inspections · Learn

Learn › Become a NY Home Inspector

Become a NY Home Inspector

A free, week-by-week study track for the New York home inspector license, organized by the four DOS course modules and ordered the way an inspection actually goes. 14 weeks, about 2 to 4 lessons a week. Go at your own pace.

Free supplemental study material. Not a NYS DOS-approved qualifying course and does not count toward the required 140 hours. No pass-rate, job or income promises are made or implied.

Orientation

Week 1

  1. NY license path and the law, step by stepReadyNY-specificCourse or supervised-inspection route, exam choices, insurance and fees, with links to DOS.15 min
  2. How to use this track (and your tools)ReadyA weekly routine, a notebook habit, and the basic tools and safety gear inspectors carry.10 min

Module 1: Structure, exterior & roof

Week 2

  1. Roof coverings: pitched and flatReadyShingles, flat-roof membranes, patching and ponding, and how to inspect safely.20 min
  2. Flashing, gutters and roof drainageReadyWhere roofs leak, and why gutters and leaders matter to the basement.15 min

Week 3

  1. Exterior walls, siding and masonryReadySpalling brick, open joints, lintels, siding and trim.20 min
  2. Grading, walks, stoops and retaining wallsReadyWater should run away from the house. What to look for when it doesn't.15 min
  3. Older NYC housing stock: pre-war and row housesReadyNY-specificParty walls, shared roofs, brick bearing walls and what decades of renovations leave behind.20 min

Week 4

  1. Basements, foundations and crawlspacesReadyStone, block and poured foundations, and how to read cracks.20 min
  2. Water at the foundation: efflorescence and dampnessReadyWhat white mineral deposits, staining and standing water tell you.15 min
  3. Structure: beams, posts, joists and sillsReadyRot, notching, sagging and past repairs.15 min
  4. Termites and other wood-destroying insectsReadySpecialtyMud tubes, galleries, frass and when to refer to a pest professional.15 min
  5. Radon testing basics in NYReadySpecialtyWhat radon is, how short-term tests work and what the EPA action level means.15 min
  6. Write it up: Module 1ReadyWrite it upPractice writing up defects from this module's photos, then compare with a model write-up.20 min

Module 2: Interior, insulation, ventilation & electrical

Week 5

  1. Interiors: walls, floors, stairs and ceilingsReadySloping floors, stair safety and signs of past leaks.20 min
  2. Doors and windowsReadyOperation, egress, glazing and fire-rated doors.15 min

Week 6

  1. Attic insulation and ventilationComing soonDisplaced batts, bare spots, bath fans venting into the attic, and airflow.20 min
  2. Suspected mold: moisture firstComing soonSpecialtyFinding the moisture source first, and when to recommend testing.15 min

Week 7

  1. Electrical service and panelsComing soonService entrance, panel brands to flag, double taps and grounding.25 min
  2. Wiring types: knob-and-tube to modern cableComing soonIdentifying old wiring, open splices and amateur work.20 min
  3. Write it up: Module 2Coming soonWrite it upPractice writing up defects from this module's photos, then compare with a model write-up.20 min

Module 3: Heating, cooling, plumbing & fireplaces

Week 8

  1. Heating: hot-water and forced-air systemsComing soonHow each system works, common defects, and the limits of a visual inspection.20 min
  2. Steam heat in NYC buildingsComing soonNY-specificOne-pipe and two-pipe steam, the sight glass, radiators and what bangs.20 min
  3. Heating oil tanks, above and below groundComing soonNY-specificSpotting tanks, fill and vent pipes, and when to suggest a tank sweep.15 min

Week 9

  1. Cooling: central air, mini-splits and window unitsComing soonWhat to operate, what to observe and what to defer.15 min
  2. Water supply piping: galvanized, copper, PEXComing soonReading pipe materials, low flow, and corroded valves.15 min
  3. Water heaters and ventingComing soonRelief valves, discharge pipes, venting and fuel. (No seismic straps needed in NY.)20 min

Week 10

  1. Old cast iron vs modern no-hub drain pipeReadyHow to tell old hub-and-spigot cast iron from modern no-hub, what failure looks like, and what to write.20 min
  2. Sewer lines from house to street, and the sewer scopeReadySpecialtyHow the building drain, house trap and lateral fit together, what fails, and when to recommend a camera.20 min
  3. Fireplaces and chimneysComing soonCrowns, flashing, liners, dampers and what you can and can't see.15 min
  4. Write it up: Module 3Coming soonWrite it upPractice writing up defects from this module's photos, then compare with a model write-up.20 min

Module 4: Profession, NYS law & report writing

Week 11

  1. Standards of practice and the code of ethicsComing soonWhat you must inspect, what you may decline, and conflicts of interest.20 min
  2. NYS home inspection lawComing soonNY-specificThe licensing law, renewals, continuing education and what licensees may not do.20 min
  3. Co-ops, condos and building filings: FISP/Local Law 11, LL152, LL97Coming soonNY-specificWhat a unit inspection covers, and the building records a buyer's team should ask about.20 min
  4. The pre-inspection agreementComing soonScope, exclusions and what clients need to know before you start.15 min

Week 12

  1. Defect recognition and report writing 1: see it, name it, place itComing soonReport writingDescribing what you see in plain words and exact locations.20 min
  2. Defect recognition and report writing 2: why it matters and what to doComing soonReport writingMinor, plan-for and urgent, and recommending the right professional.20 min
  3. Defect recognition and report writing 3: photos and captionsComing soonReport writingShots that prove the point, and captions a client can understand.15 min
  4. Limiting your liability honestlyComing soonReport writingClear language, disclaimed areas, and keeping good records.15 min
  5. Write it up: Module 4 capstone reportComing soonWrite it upPractice writing up defects from this module's photos, then compare with a model write-up.20 min

Field practice

Week 13

  1. Getting the most out of field hoursComing soonHow to prepare for supervised inspections and what to practice.15 min
  2. Photo drills: name the defectComing soonWrite it upPractice with real photos from NYC-area inspections.20 min

Final exam prep

Week 14

  1. Choosing and booking your examComing soonNY-specificNYS exam vs National Home Inspector Exam, and how to register.15 min
  2. Module tests and review planComing soonUse the practice bank's 10-question module tests, then review your weak spots.45 min

The NY license path at a glance

  • High school diploma or equivalent.
  • Education route: a DOS-approved course of at least 140 hours, including 40 hours of unpaid field inspections under direct supervision of a NYS licensed home inspector, engineer or architect. Or experience route: at least 100 home inspections under that same direct supervision.
  • Pass the NYS written exam ($50) or the National Home Inspector Examination.
  • File proof of general liability insurance of at least $150,000 per occurrence and $500,000 aggregate.
  • Initial application fee $250, nonrefundable. The license lasts two years, and renewal is $100.

Sources: NYS DOS: Become a Home Inspector · NYS DOS: Qualifying Exam · DOS license application (PDF). Always confirm current requirements with DOS before you apply.

How this track is ordered: the four DOS course modules are the top level. Inside each module, lessons follow the order of a real inspection, from the roof and exterior down to the basement, then through the interior and systems. Lessons marked NY-specific cover topics you won't find in national courses, and every module ends with a Write it up practice.