What your inspection covers and which specialty tests to add In New York, your inspection usually happens in the short window after your offer is accepted and before you sign the contract. That's not much time, so it pays to know ahead of time what a standard inspection covers, what it doesn't, and which extra tests are worth booking for the same visit. What a standard home inspection covers A home inspection is a visual, non-invasive look at the parts of the home that can be readily reached and seen. A New York licensed inspector follows the state's standards of practice, which cover the major systems, including: Structure and foundation Exterior, grading and drainage Roof, flashing and chimneys Plumbing: supply, drains, water heater Electrical: service, panel, a sample of outlets and switches Heating and cooling Interior: walls, floors, stairs, windows and doors Insulation and ventilation in accessible areas like the attic You get a written report describing what was observed, why it matters, and what to do next. What it doesn't cover An inspector can't see inside walls, under carpets, or behind a basement full of stored boxes. A standard inspection is not a code-compliance check, and it doesn't include tests for environmental hazards or a look inside the buried sewer line. Those are what specialty tests are for. Specialty tests worth considering TestConsider it when Termite / wood-destroying insect (WDI) Any wood-framed home, wood in contact with soil, or past water problems. Many lenders, especially FHA and VA, ask for the report. Radon Any home. The EPA recommends testing, and a short-term test runs at least 48 hours with the house closed up. Mold Visible growth, a musty smell, or a history of leaks or flooding. Sewer scope Older homes, mature street trees, slow drains, or any home where you'd own the line to the street. Oil tank sweep A home that is or ever was heated with oil, or has an unexplained fill or vent pipe outside. Lead paint Homes built before 1978. Federal rules give buyers a chance to test. Well water and septic Homes not on city water or sewer, which you'll find in parts of Long Island and Westchester, Rockland, Putnam and Orange counties. Termites: what damage really looks like Look for pencil-width mud tubes on foundation walls, wood that sounds hollow, and damage near damp areas. A WDI inspection is a visual check of accessible wood, so hidden damage can still exist. If activity or damage is found, a licensed pest control company treats it and a contractor evaluates the wood. Radon Radon is an invisible, odorless gas that comes from the ground. You can't tell from looking whether a house has a problem, which is why the EPA recommends testing. If a test shows 4 pCi/L or more, the EPA recommends fixing the home, usually with a mitigation system. Levels vary from county to county and house to house, so a neighbor's result doesn't tell you yours. Mold Sewer scope Book them together Because the window before contract signing is short, book the inspection and the tests you want at the same time. Radon needs at least two days, and lab results for mold take a few more. Ask your inspector which tests they can do in the same visit. Want the whole timeline in one place? Download the free NYC-Area Home Buyer's Inspection Guide, or book an inspection and add specialty testing to the same visit. Questions? Call (914) 933-7803. Se habla espaƱol. Key takeaways: A standard inspection is visual and covers the major systems you can reach and see. It doesn't see inside walls or the buried sewer line, and it doesn't test for radon, mold or lead. Add tests based on the house: termite for wood framing, radon for every home, sewer scope for older lines, a tank sweep for oil heat, lead paint for pre-1978 homes. In NY the window before contract is short, so book everything together.