Exterior walls, siding and masonry Walk any block in Brooklyn, Queens or the Bronx and you'll see the whole history of NYC building on one street: brick row houses, brownstone fronts, stucco, and wood-frame houses wearing vinyl or aluminum siding over whatever was there before. The exterior is where water tries to get in every single day, so this is where you learn to read walls. We'll cover what the NY Standards of Practice ask for, the wall types you'll see, the masonry problems that matter, and the spots above windows and at the roofline that tell you the most. What the SOP asks, and the walls you'll see Under the NY Standards of Practice you observe and report on all exterior walls and coverings, flashing and trim; exterior doors; attached decks, balconies, stoops, steps, porches and railings; eaves, soffits and fascias where accessible from the ground; adjacent walkways, patios and driveways; and a representative number of windows (19 NYCRR § 197-5.6(a), in the DOS law and regulations PDF). You're not required to report on things like shutters, awnings and other seasonal accessories, fences, or the integrity of thermal window seals (§ 197-5.6(b)). The wall types you'll meet most: Brick row houses. Many older ones have solid masonry walls, where the brick itself carries the load, not just a brick skin over framing. Brownstone fronts. A soft sandstone facing on many older row houses. It weathers, flakes and gets patched, often with a cement-based coating shaped to look like stone. Stucco. A cement-based coating over masonry or framing. Watch for cracks, bulges and hollow-sounding areas. Wood frame with siding. Vinyl or aluminum siding is often installed over older wood or asbestos-cement shingles. You can't see what's under it, so say so in the report. Masonry problems that matter Spalling: the face of the brick or stone breaking off, usually from water getting in and freezing. Note where and how widespread. Cracked brick and step cracks: cracks that follow the mortar joints in a stair-step pattern can point to movement. Describe the location, direction and width as you see it, and recommend evaluation when it looks active or significant. Open or eroded mortar joints: mortar that's recessed, crumbling or missing lets water into the wall. Efflorescence: white, powdery salt deposits left when water moves through masonry and evaporates. It isn't damage by itself, but it tells you water is moving through that wall. Repointing means raking out deteriorated mortar and filling the joints with new mortar. On older, softer brick, the mortar matters. The National Park Service's guidance on repointing historic masonry says new mortar should be softer and more vapor-permeable than the masonry units (NPS Preservation Brief 2). Hard cement-rich mortar on soft old brick is something to note, and a mason should evaluate the damage around it. Above the windows and at the roofline Lintels and window heads. Over every window and door opening, something carries the masonry above: a steel angle, a stone or brick arch, or a stone head. When a steel lintel rusts, it expands and can push the brick up and crack it. Inspectors call this rust jacking. Exposed steel lintels need to be kept painted, so note bare, flaking or rusted steel even before it cracks anything. Look for cracks starting at the corners of openings, bricks that have shifted, and rust stains or rust you can see at the lintel. Parapets and coping. You saw these from the roof in Week 2. From the street or the yard, look for leaning, cracked or open masonry, and missing or loose coping. Loose masonry overhead is a safety issue, so say so clearly. The parapet is also a good place to read the wall: where you can see the wall's thickness, or header bricks turned endwise to tie layers together, that points to solid masonry rather than a single layer of brick over framing. Siding and trim. Look for loose, cracked, missing or bowed siding, gaps at corners and around windows, and trim that's rotted or soft. Note where siding meets the ground or a roof, since that's where water collects. Windows. The SOP has you look at a representative number. Check the frames and sills outside for rot, failed caulking and sills that slope back toward the house. Caulk and sealant are maintenance items: they dry out, crack and pull away over time. Press on a joint with a putty knife or your fingernail; hard, cracked or gapped sealant should be redone. Write it as maintenance, not as a major defect. Writing it up For each finding, give the wall material, what you saw, exactly where (front facade, second floor, above the left window), why it matters, and who should look at it: a mason for masonry, a siding or general contractor for siding and trim. Don't diagnose a structural cause you can't confirm. Key takeaways: The NY SOP covers exterior walls, coverings, flashing, trim, doors, stoops, steps, walks and a representative number of windows. NYC exteriors range from solid brick and brownstone to stucco and siding over older siding. Note what you can't see. Spalling, cracked or step-cracked brick, open mortar joints and efflorescence all point to water or movement. Rusting steel lintels can crack the masonry above openings; loose parapets and coping are safety issues. Describe material, location and condition, and recommend the right trade without guessing a cause.